Frequently asked questions about FRP and dual laminate
These answers provide general guidance on industrial fibreglass-reinforced plastic (FRP) and dual laminate equipment. Final material selection, design, fabrication, inspection and testing must be defined for the service conditions and requirements of each project.
What is fibreglass-reinforced plastic (FRP)?
FRP is a composite made from a thermosetting resin and glass reinforcement. For industrial equipment, the resin system, corrosion barrier and load-bearing laminate are defined according to the fluid, operating conditions, loads and project requirements.
Which industries use FRP or dual laminate equipment?
These constructions may be used in chemical processing, water and wastewater treatment, pulp and paper, mining, power generation and other industrial sectors. Suitability still depends on the specific service; an industry name alone does not establish the compatibility of a material or equipment.
What is the difference between FRP and dual laminate?
In conventional FRP construction, the corrosion barrier and structural laminate are parts of a thermoset composite system. In dual laminate construction, a thermoplastic liner selected for the project forms the chemical barrier, while the structural FRP laminate carries the loads. Dual laminate is not automatically preferable to conventional FRP; selection depends on documented service conditions.
Is an FRP tank suitable for a corrosive environment?
It may be when the material system and design are selected for the full set of service conditions. The evaluation should account for the complete fluid or mixture composition, concentration range, normal and abnormal operating temperatures, design temperature, internal or external pressure including vacuum conditions, solids, contaminants and cleaning chemicals. The general reputation of a resin does not replace this review.
Does Troy Dualam custom-fabricate FRP tanks and equipment?
Troy Dualam Inc. custom-fabricates tanks, vessels, piping and prefabricated spools, ducting, scrubbers, towers and other industrial FRP or dual laminate equipment. The scope of engineering, shop fabrication, interfaces, inspections, testing and documentation is confirmed for each project.
Which materials are used to fabricate FRP equipment?
Conventional FRP uses a thermosetting resin system selected for the project—commonly a vinyl ester resin—together with glass reinforcement and surface veils defined for the construction. In dual laminate construction, a thermoplastic liner selected for the service is backed by a structural FRP laminate. No material is suitable for every chemical or every temperature.
How long does an FRP tank last?
There is no universal service life. It depends on the design basis, material system, fabrication, installation, actual operating conditions, process deviations, environmental exposure, inspection and maintenance. A credible assessment should rely on the intended service, equipment condition and available records rather than a general promise stated in years.
Can FRP equipment be installed outdoors?
Yes, when the project design accounts for outdoor exposure. Relevant inputs may include UV exposure, extreme ambient temperatures, design temperature, wind, snow, seismic loads, supports, anchorage, drainage, connections and site constraints. Outdoor suitability should not be assumed from the material alone.
What information is needed to start a project with Troy Dualam?
Provide the available information on equipment function and quantity, the complete fluid or mixture composition, concentrations, normal and abnormal operating temperatures, design temperature, internal or external pressure including vacuum conditions, capacity and dimensions, loads, connections, shipping and site constraints, applicable codes or specifications, and required inspections, tests and documents. Troy Dualam will review the requested scope and identify missing inputs.
What is the scope of Troy Dualam’s ASME RTP certificate?
Troy Dualam Inc. holds the active ASME RTP Certificate of Authorization No. RTP-51 for shop fabrication within its stated scope. The applicability of ASME RTP-1 and use of the ASME Certification Mark with the RTP Designator are confirmed for each project. The certificate scope does not include piping, ducting, field fabrication, field assembly or field repairs. Review the certificate scope and official verification guidance.
Discuss your service conditions
Share the available project data and intended scope so the Troy Dualam team can identify the information needed for project review.
For field assembly and repair, contact Troy Dualam Services under a separate, project-specific scope.
For standard components, visit FRP Depot.